https://bluesinc.atlassian.net/wiki/spaces/DE/pages/7864441/Sparrow+Setup+and+Run+Guide

The Sparrow family consists of one or more Sensors which communicate JSON-formatted Notes using a LoRa radio to a Gateway with which they have been manually paired. A Sparrow Gateway will forward messages received from its paired Sensors to the cloud via Notecard. Conversely, it will also forward messages received from the cloud via Notecard to an associated Sensor.

The goal of this guide is to provide everything you need to help you set up, configure and start collecting data from the Sparrow platform!

Prerequisites

Hardware

• Sparrow Essentials Board
• Sparrow Reference Sensor Board
• Notecard (preferably Note-WiFi)
• Notecarrier-AL (with Qwiic Connector)
• STLINK-V3MINI
• Qwiic Cable
• USB Type A-to-Micro Cable
• LiPo (2000mAh)
• (2x) AAA Batteries
• v1.0 HARDWARE ONLY

Software

Firmware

• Sparrow Accelerator Sensor Firmware (clone using --recursive)

Tooling